This will be a good day. The cottage has never had soffit and as a result we have suffered the ill effects of bees, wasps, bugs and birds. Today this comes to an end. No more bird nests and baby birds to relocate.
At this point the soffit is finished and we can proceed with the metal roof installation.
The roofing contractor is scheduled to arrive on Thursday and the weather report is looking very good. I’m not sure how long they will be here but it’s taken us quite a while to get to this point. It’s very exciting to finally arrive at this day.
June 7, 2020 – Yesterday I made it around the south west corner with the soffit. Today I am working on the south side soffit installation. I tried to get an early start so I can make it around the south east corner.
The south side has the closet bump out. As I proceed around the closet I will have to create two inside corners. This is more intricate and takes a little more time to do.
With the soffit complete around the closet bump out I continue towards the south east corner. Thankfully, the electric service entrance LB fitting is below the line of the J channel and the soffit.
Near the end of the day I rounded the south east corner and continued up the east side until I reached the bird nest and the family of birds that took up residence under the overhang.
Clearly this is the result of some bad parenting decisions. Since I couldn’t bring myself to relocate this unlucky bunch peepers I called it quits for the day. We have to head back home tonight to take care of some chores but we’ll be back in a day or so.
The new metal roofing is scheduled for delivery on Tuesday, June 9th and the roofers are supposed to start on Wednesday the 10th. If everything goes as planned the cottage will have a new roof by the end of next week!
June 6, 2020 – Continued from yesterday, the soffit installation goes up and down each gable rake on the west end of the cottage and around the corner to the south side.
As I approach the roof ridge, I frame in, close up and cover the old vent opening with building wrap. In the photo below the soffit installation proceeds up the northern gable rake. The J Channel has been installed on the southern gable rake.
With the soffit done on the southern gable rake, the installation rounds the corner and continues on the south side of the cottage. This is existing overhang that for years, has been exposed with no soffit.
The soffit on two sides are is now complete. The south side will take a little longer as I have to work around the rhododendrons you see above. This will be tomorrows goal.
June 5, 2020 – Aluminum soffit installation continues on the north side of the cottage I framed a two foot overhang along the new porch roof to give us a little more protection from the elements. My baker scaffold makes the installation process easier.
The installation of PVC trim boards and J Channels on the porch beams precede the soffit.
The porch roof has a shallow pitch so I decided against framing a tradition “Bird Box” at the corner. Instead I turned up the J Channel and aluminum soffit before it reached the gable end. This allows the soffit to make a smooth transition and proceed up along the gable rake. You can see this in the photo below and also in this photo, No Bird Box.
The soffit on side one is complete. Hang in there we are on the way to a new roof!
June 01, 2020 – Over the next several posts I will be installing vented aluminum soffit under the roof overhang. The soffit runs all the way around the cottage. I will try to keep the posts short and hopefully you won’t be bored to death.
During the normal sequence of construction, the soffit installation proceeds the fascia covering. Therefore, if I complete the soffit before the Metal Roofing Contractor arrives they will be able to complete the roofing and the fascia without having to leave. This gets them in and out without delay.
Here we go…. from the north east corner in a counter clockwise direction.
First up, I install a couple of sections of PVC trim boards on the exposed porch beams. We choose Royal Building Products PVC trim for our beam wrap. Next, I fasten Aluminum J Channel to the trim boards. Then I started the the soffit installation.
This weekend, we stayed at the cottage an extra day so I could start the soffit. I am happy that we did. It is starting to really look good.